Тип активен охладител
Вентилатор за Кутия
Диаметър на вентилатора 140 мм
Обороти на вентилатора 2000 об/мин
Максимално ниво на шум 31.5 dB
Въздушен поток 107.41 CFM
Размери 140 x 140 x 25 мм
Тегло 400 г

Виждате грешка в описанието или таблицата? Сигнализирайте ни!

Planned for industrial heavy duty applications that command increased chilling performance and advanced ingress protection, the NF-A14 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the grant-winning retail model. The 24V variation uses a votive blanket stimulant range reading of Noctua's NE-FD2 motor driver IC systematic to support 24V-based industrial applications. Thanks to the outstanding aerodynamic efficiency of the NF-A14 design and the use of a novel ternary-phase motor, the industrialPPC version provides topping airflow and blackjack capacity while keeping noise levels and power consumption moderate as against same high-speed fans. While its fibre-glass reinforced polyamide construction and certified urine and dust protection make the NF-A14 industrialPPC fit for operation in challenging environments, the known SSO2 carriage technology guarantees an MTBF of over 150.000hrs. Lidded off with Noctua's trustworthy reliability and 6 years producer's guarantee, the NF-A14 industrialPPC is an nonesuch choice for highly demanding applications that require superior stream rates and ultimate reliableness.

Honour-winning NF-A14 innovation
Having received more than 100 awards and recommendations from the outside press, Noctua's NF-A14 has become a proven superior choice for 140mm cooling inevitably. Its renowned efficiency has convinced tens of thousands of customers all over the Earth.

2000rpm industrialPPC version
Thanks to its elevated 2000rpm upside speed, the NF-A14 industrialPPC-2000 provides a significant execution boost over the 1500rpm retail version. Combined with the industrialPPC series' iron polyamide structure and advanced protection features, this makes the rooter ideal for stimulating industrial applications.

24V version
The industrialPPC 24V models use a votive wide input cooking stove interpretation of Noctua's NE-FD2 three-phase PWM motor driver IC. Supporting operating voltages from 6 to 30V, these models are ideal for 24V-based business applications and voltage- operating room PWM-based rush control.
Lower berth speed and noise levels in 12V PC environments
Lower speed and noise levels in 12V PC environments
While the industrialPPC 24V model has been designed with 24V blue-collar applications in mind, it runs at a maximum speed of some 1100rpm in 12V PC environments and can be slowed down further via PWM, thus combining industrialPPC features and project with Noctua's key signature tranquillity.

Three-phase motor design
While virtually axial fans use single-phase motors with 4 slots, Noctua's industrialPPC fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and frankincense allows for even high running eloquence, further reduced vibrations and unprecedented energy efficiency.

Qualified IP67 water- and dust protection
The motor and PCB of the IP67 adaptation are completely cast in a specialised, extremely heat semiconductive resin that combines thoroughgoing security and effective motor heat dissolution. Complying with the ingress aegis rating IP67, this fan is not solely fully dust cockeyed but also completely waterproof up to 1m water depth.

Vulcanized fiber-drinking glass reinforced polyamide mental synthesis
Both the impeller and the skeletal frame of Noctua's industrialPPC fans are made entirely from fibre-glass reinforced polyamide. This material throne withstand temperatures capable 140°C and makes the fans even many robust and break-proof than Noctua's standardised fibre-glass reinforced PBT fans.

AAO Inning
Noctua's AAO (Advanced Natural philosophy Optimisation) frames feature integrated anti-vibe pads A well as Noctua's copyrighted Stepped Inlet Design and Inner Surface Microstructures, both of which further elaborate the fan's functioning/noise efficiency.

Flow Acceleration Channels
The NF-A14 impeller features suck side Feed Acceleration Channels. Aside speeding up the flow of air at the crucial out blade regions, this standard reduces suck side rate of flow breakup and frankincense leads to better efficiency and lower vortex noise.

Stepped Recess Design
Noctua's Stepped Recess Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow from attachment and increases suction capacitance, particularly in space-restricted environments.

Inner Surface Microstructures
With the tips of the fan blades ploughing through the boundary layer created by the Inner Skin-deep Microstructures, flow detachment from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

Integrated Anti-Vibration Pads
Coordinated Anti-Vibration Pads made from spear carrier-compressible silicone understate the transmission of minute vibrations while maintaining full compatibility with all standard climbing systems and fan clips victimized along heatsinks.

SSO2 Bearing
The NF-A14 industrialPPC features the further optimised forward generation of Noctua's renowned, clip-tested SSO bearing. With SSO2, the bottom magnet is placed closer to the Axis to provide even out better stabilisation, precision and durability.

Bimetal bearing shell
In order to guarantee the highest possible degree of manufacturing preciseness, minimum allowance and excellent long-full term stability, the NF-A14 industrialPPC sports a CNC milled bearing shell made entirely from brass.

Custom-designed PWM IC with ScD
Supporting fully automatic PWM speed control, the NF-A14 industrialPPC uses Noctua's custom-designed NE-FD2 PWM IC for threesome-phase motors. The NE-FD2 integrates Noctua's proprietary Smooth Re-sentencing Ride (SCD) technology, which suppresses PWM switching noises and thus makes the fan quieter at lower speeds.

6-yr maker's warranty
Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A14 industrialPPC features an MTBF rating of more 150.000 hours and comes with a full 6-twelvemonth maker's warranty.

Customisable for industry clients
For industry clients, various features, certificates, packaging options and accessories can be bespoke along requests. For example, we seat provide 24V versions, different connectors and speeds, several cable's length or UL and TÜV certification. Please feel free to contact us for custom-built offers!

FAN Specification

Size
140x140x25 mm
Connector
4-Peg PWM
Bearing
SSO2
Blade Geometry
A-Serial with Flow Acceleration Channels
Underframe Technology
AAO
Rotational Speed (+/- 10%)
2000 Rev
Min. Movement Speed (PWM, +/-20%)
500 Rev
Movement Speed @ 12V (+/- 10%)
1100 RPM
Airflow
182,5 m³/h
Acoustical Noise
31,5 dB(A)
Motionless Pres
4,18 millimeter H₂O
Max. Input Power
2,4 W
Max. Stimulation Current
0,1 A
Potential dro
24 V
MTBF
> 150.000 h
Scope of Delivery
Buff
4 Fan Screws
Warranty
6 years

Продукт известен още и като NF A 14 industrialPPC 2000 IP 67 PWM 140 x 140 x 25 millimetre, NFA14industrialPPC2000IP67PWM140x140x25mm, NF A14 industrialPPC 2000 IP67 PWM 140x140x25mm, NF-A14industrialPPC-2000IP67PWM140x140x25mm, NF A14 industrialPPC-2000 IP67 PWM 140x140x25mm, NF-A14 industrialPPC-2000 IP67 PWM 140x140x25 mm

Галерия

Is the Nf-a14 Industrialppc-2000 Ip67 Pwm a Static Pressure Fan

Source: https://www.pazaruvaj.com/ventilatori-c3094/noctua/nf-a14-industrialppc-2000-ip67-pwm-140x140x25mm-p232667955/